light – Ledbe Blog

Ideas for LED Staircase/Steps

October 20, 2023February 24, 2025 ledbe Leave a comment

LED Staircase/Steps Lighting can add a touch of elegance and functionality to your rooms. The stair illumination offers a visually pleasing touch to your staircase and provides light when you walk at night. If you do not have experience with this, today let’s share the ideas for staircase lighting.

Here are some ideas to inspire your LED Stair design:

Illuminated Steps: Install LED lights along the edge of each stair tread to create a subtle and safe lighting effect. This not only enhances the aesthetics but also helps in navigating the stairs in low-light conditions.
Underneath Lighting: Place LED strips on the underside of each step to create a beautiful glow effect. This can add a dramatic and modern touch to your staircase, especially with other ambient lighting.
Motion Sensor Lights: Incorporate motion sensor LED lights that activate as you approach the staircase. This adds safety and gives your staircase a futuristic and high-tech vibe.
Recessed LED Lighting: Install recessed LED lights along the sides of the staircase to create a seamless and minimalistic look. This type of lighting adds a sleek and contemporary element to your stairs.
Backlit Handrail: Consider adding LED lights to the handrail of your staircase. This not only provides a functional light source but also acts as a stylish focal point. The backlit handrail can create an inviting and warm ambiance.

Below are three models of aluminum light channels for the staircase, which will add soft lighting on the steps.

ALP024-R: This type of Aluminum LED Channel can be mounted on the edge of steps. With a downward lighting design, it houses LED Strip Lights and provides a safe and attractive way to light up your steps. The Aluminum Channels can be worked as heat sinks for better heat dissipation. It comes with PVC anti-skid covers to allow you to step on them safely.

2. ALP024-R1: This type of black aluminum LED Channels with up and down lighting design. You can mount them on the edge of the staircase to create a unique look and stand output in your room. With upward and downward lighting design to create brighter lighting around the steps.

3. ALP192: These LED Channels are for stair handrail lighting. Which will create a bright ambiance lighting around the staircase. With an up-and-down design that lights up the entire handrail, it’s perfect for adding lighting on steps.

Remember to contact us to ensure the proper installation and safety of your LED staircase/step design. Enjoy the stunning transformation of your staircase with these LED lighting ideas!

SP801E? Real Worth It?

March 7, 2022February 24, 2025 ledbe Leave a comment

The SP801E, which is the newest Pixel Controller by Shenzhen Sperll company, this company released the classic Controllers for the Addressable LED Strips like SP105E, SP110E, SP108E, SP501E, etc. if you check the photo of the SP801E below, you will think, it looks the same like the SP105E, so if we own one the old product, why we need to another similar one, Is it’s really worth it?

The SP801E LED Controller with 4 output ports, each port supports 1024PCS ICs, so the totally supported number of ICs up to 4096PCS, not only supports the main types of ICs on the market but also supports multiple Art-Net software, supports regular rectangle layout setting and importing DXF files. built-in multiple types of effect layers, text layer, music effect layer, etc. the effect layers support a variety of custom parameters: direction, width, color, length, shape, etc. with the real-time preview function, you will know how it looks like before run on the LED Lights. so it can work with LED Strips, LED Matrix, LED Panels, etc.

The Smart Pixel Controller supports AP mode and STA mode.

the working voltage from DC5V to DC24V, the working voltage depends on the LED Lights. you can control the LED Controller by smartphone APP via WiFi, it supports IOS and Android mobile systems, you can download the APP “BalanX” in the APP stores. the Controller supports AP mode and STA mode.

Button:

1. Click on the button: Switch AP/STA mode;

2. Press and hold the button: Enter the BluFi network configuration mode; LED Indicator:

1. Blue static: AP(Access Point) mode;

2. Green static: STA(Station) mode;

3. Green flashing: BluFi configuration mode;

Working Modes：

1. AP(Access Point) mode: Controller and Phone connect directly, controller works as an access point.

1> Go to your phone Settings page, connect the controller(SSID like SP801E_XXX, the default password is 12345678);

2> Open the BanlanX App, Click the “+” button to configure the new SP801E controller, then the controller will be shown on the device list; 2. STA(Station) mode: Controller and phone are in one same Wi-Fi network, in this network, users can operate the controller.

There are two ways to configure the controller into the local Wi-Fi network:

1> Connect your phone or tablet to a 2.4G Wi-Fi network. (Doesn’t support 5.0G Wi-Fi network)

2> Open the App and click the “+” button to scan devices, click Add manually and select SP801E controller in the device category;

3> Input your Wi-Fi network password;

4> BluFi config and AP config:

BluFi config: Press and hold the device’s “STA/AP” button until the green led indicator flashes, then the device enters the network configuration state, click next and select the device you want to add;

AP config: Switching the device to the AP mode, click next and connect your phone’s WIFI to the named like SP801E_XXX hotspot, the password is 12345678, and return to the APP;

5> Pressing next step to wait for the configure processing to finish;

6>After the configuration is finished, the LED indicator will turn into solid green, the controller will be shown on the device list.

5730 LED Modules For Car/Auto Interior Light

March 18, 2017February 27, 2025 ledbe Leave a comment

Hi,guys,today will show you the new LED modules for car or auto interior lights,yes,but them also can used as back lights of signs,billboards etc.

this style LED module specially designed to use for car and auto interior lighting,use the high quality 5730 SMD LEDs as light source,each piece of module have 3pcs LEDs,the base of module is PCB and aluminium,so better heat dissipation than the ordinary LED module,longer lifespan,the surface of module with lens,widely angle view.one hole in the middle of module,so user can fix them using screws,if feel complex,the back with self-adhensive tape.

this 5730 LED module comes with 5meters long wire,so user can use them in many places,specially for car,track,auto interior light,read lighting etc,and 10pieces LED modules per string,can cut any pieces LED modules you need and reconnect them to 12V battery or LED power supply. You should really avoid plugging this into the car battery unless you have the best lithium jump starter handy since these lights might drain the battery and cause you a world of trouble.

Features: