Check the 5050 LED Modules, which uses 4PCS high-quality and super bright SMD LEDs as the light source, the LEDs mounted on the aluminum board for better heat dissipation, with the fireproof ABS shell and epoxy sealed, the IP rating reach IP65 for indoor and outdoor applications. the back with double side adhesive tape and both sides with screw holes, take off the protector on the tape and stick on the place you want to install, or use the screws to fix them on the project. the 5050 LED Modules with 20PCS per string, cuttable and reconnectable, can cut any quantity and reconnect them for your project. working in DC12V, easy to connect to the LED Adaptor to light up or connect the LED Dimming Controller to adjust the brightness for single color or color-changing style for the RGB. you can use them as the backlight for signs, channel letters, billboards, interior light for cars, trucks, vans, etc.


  • Item NO: TY-5050-M003
  • Manufacturer: TYoung
  • Working Temperature: -25°-+60°
  • Size: 55*33mm(L*W)
  • LED: 5050 SMD LEDs
  • LED Quantity: 4PCS
  • Voltage: DC12V
  • Power: 0.96W/PC
  • IP Rating: IP65
  • Lumen: 15-17lm/LED
  • MCD/LED: 1300-1500
  • Power Factor: >0.9
  • Luminous Flux: 56-64lm
  • Color: Red/Yellow/Blue/Green/Cool White/Warm White/RGB
  • Color Temperature: Warm White(2700K-3200K), Cool White(9000-12000K), Red(620-625nm), Green(515-525nm), Blue(465-475nm), Yellow(585-595nm)
  • Luminous Flux/PC: White(80-88lm), Red(26lm), Green(50lm), Blue(16lm), Yellow(20lm)
  • Beam Angle: 120°
  • Color Rendering Index: >70Ra
  • 20PCS Per String
  • Back With Double Side Adhesive Tape
  • Both Sides With Screw Holes
  • Weight: 220g
  • Lifespan: 35000-50000hours
  • 3 Years Warranty


1*mold injection 5050 LED modules(20PCS/String)

Mold Injection 5050 LED Module 5050 SMD LED Module 5050 4 LED Module Light

Write a review

Note: HTML is not translated!
Bad           Good