+
+
+
+
+
+
+
Check the LED Strips WS2813, which feature an individually addressable design. The 5050 RGB SMD LEDs are built with a WS2813 IC, the Upgraded Version of the WS2812B. One IC controls one piece of LED, allowing every LED to be cut to any length for your project. The WS2813 Strip Lights feature a dual-signal wire design; if one signal wire breaks, the backup data wire continues the transmission, allowing the rest of the LED Light Strips to function normally. There are various LED options available per meter, including 30 LEDs/meter, 60 LEDs/Meter, 144 LEDs/Meter, and lengths of 1 meter and 5 meters. Three waterproof level products are available: IP30 non-waterproof, IP65 coating waterproof, and IP67 silicone tube waterproof. You can use the IP30 and IP65 for indoor applications; the back features double-sided adhesive tape for easy installation and use. The IP67 WS2813 Light Strips come with LED clips, allowing for installation in wet, damp, or water-logged locations. The Full-Color RGB Tape Lights are compatible with our Pixel LED Controllers. You can let them work with K-1000C, SP105E, SP107E, SP108E, etc., to achieve thousands of amazing lighting effects, such as curtain-up, flowing water, raindrops, and jump flash, and edit the animation effects using CorelDRAW, Flash, and LEDEdit software by yourself. The Digital LED Strip Lights come with 4-pin JST SM Connectors and separate power and ground wires on both ends.
Note:
The LEDs at the far end may be dimmer due to the added resistance and voltage drop. We recommend adding the same working voltage every 5 meters (16.4 ft) according to the actual situation to maintain the same brightness.
Specifications:
- Working Voltage: DC5V
- Colors Of PCB Board: White/Black
- IC Type: Built-in WS2813 IC(Upgraded Version Of WS2812B)
- Individually Addressable
- LED Type: 5050 RGB SMD LEDs
- LED Chip: Epistar
- LED Quantity: 30LEDs/Meter, 60LEDs/Meter, 144LEDs/Meter
- Luminous Flux: 8lm/LED
- Grayscale Levels: 256
- View Angle: 120°
- Emitting Colors: RGBIC Full Color 24-Bit
- Power: 0.3W/LED
- Wave Length: Red: 650nm; Green: 520nm; Blue: 460nm
- Width: 10mm(30LEDs/Meter, 60LEDs/Meter), 12mm(144LEDs/Meter)
- Lengths Available: 1M, 5M
- Waterproof Level: IP30 Non-waterproof, IP65 Coating Waterproof, IP67 Silicone Tube Waterproof
- Dual-Signal Wires Design Signal Break-Point Continuous Transmission
- 4-Pin JST-SM Connector Included
- Pins:
- 5V: Power Voltage +5V;(Red Wire)
- DO: Control Data Signal Output(Green Wire)
- DI: Control Data Signal Input(Green Wire)
- BO: Backup Control Data Signal Output(Blue Wire)
- BI: Backup Control Data Signal Input(Blue Wire)
- GND: Data&Power Grounding(White Wire)
- Working Temperature: -20℃-+40℃
- Lifespan: 50,000 Hours
- 2 Years Warranty
Includes:
1 * RGBIC LED Strip WS2813 With 4Pin Male Connector
