+
+
+
+
+
The Gledopto elite advanced ESP32 WLED controllers are designed for addressable LED strips. Connect the controller to the phone app to control smart lighting, choose from over 100 built-in lighting effects, and use segmented color control to create various scenes. It supports most programmable LED tapes and can drive up to 1600 ICs. It features a built-in microphone to sync with music, and the lighting changes to follow the music beats. You can use them to DIY fantastic lighting effects for your home.
The WLED controller features a plug-and-play Ethernet port and a WiFi communication module, letting you connect to the smartphone app to control your lights quickly. The controller supports three input methods: V+/V-, DC ports, and the Type-C interface. You can also use the Type-C port to download programs. The output terminal features a quick-pressable design and a 4-output-channel configuration, allowing you to connect and control up to 4 groups of digital LED lights. The Gledopto controllers have a 20A pluggable fuse and come with a backup 5A pluggable fuse for energy-saving replay. When power is turned off, no current flows through the LED tapes, reducing power consumption.
Link: Gledopto elite advanced WLED controller user manual
- Support most of the programmable strip lights: WS2812B, WS2811, WS2815, SK6812, WS2813, TM1814, GS8208, SM16703P, etc
- Built-in 20A pluggable fuse for energy-saving relay
- 4-output channel design (Independent control requires setting up segment control in the WLED app)
- The microphone functions to follow the music's rhythm
- Two ways to connect to the WiFi network: Ethernet port and WiFI module
- The lighting effects of the LED strip connected to the WLED controller on the same WiFi network can be synchronized
- Three input methods: V+/V- power interface, 5.5mm/2.1mm DC socket, Type-C
- Quick-pressable connect output terminal
- Over 100 dynamic effects are selectable
- Segmented color controllable
- Type-C port for power supply and program download
- Can work with WLED remotes
Specifications:
- Material: Flame-retardant PC
- Size ( L x W x H): 129mm x 50mm x 23mm/5.08"x 1.97"x 0.91"
- Colors: Black, white
- Input voltage: DC5-12-24V
- Total output current: 15A Max
- Output current per channel: 10A Max
- Type-C voltage: 5VDC
- Type-C current: 3A Max
- Protocol: WLED
- Built-in ESP32 chip
- Maximum number of ICs supported: 1600PCS
- App name: WLED Native
- IP rating: IP20 non-waterproof
- Firmware upgradeable
- WLED signal amplifiers are sold separately
- Working temperature: -20℃-+45℃
- Warranty: 2 years
Includes:
1 x ESP WLED controller
2 x 3cm stickers
1 x 5A pluggable fuse
2 x Connect cables
2 x One-to-four terminal blocks
1 x User manual
