Check the RGB LED Strip COB, which working in DC24V, only can work with the LED Driver that the output voltage is 24V. the COB LED Strips use the 1022 LEDs as the light source, each meter includes 840PCS LEDs, the LEDs include San An chips. the COB LED Strip Light with the chip-on-board technology has a higher density of LEDs, high CRI, high brightness and uniform light emission, will not show the visible dots or hot spots, no need the extra LED Strip Diffusers, excellent efficiency and color consistency, the COB LED Strips with three colors LEDs, the red, blue and green, you could connect to Wifi RGB Controller to adjust the brightness of static colors or the color-changing modes. cuttable and re-connectable for your project, you can cut it along the cutting marks. the back with double side adhesive tape, easy to install and use. flexible and bendable, you can install them in the tiny or narrow place or other places you want, the LED COB Strips are IP20 non-waterproof, only recommend works indoors.


  • Model: COB-RGB
  • LED Chip: San An
  • LED Type: 1022
  • LED Quantity: 840LEDs/Meter
  • Working Voltage: DC24V
  • Luminous: 100-110LM/M
  • Width Of PCB Board: 10mm
  • Color Rendering Index: 90Ra
  • Power: 20.2W/M( Red: 15W/M; Green: 3.6W/M; Blue: 1.6W/M)
  • Cuttable: 50mm
  • Dimmable: NO
  • Beam Angle: 180°
  • High Density, High CRI, High Brightness, Uniform Light Emission
  • Flexible And Bendable
  • Cuttable And Re-Connectable
  • Back With Double Side Adhesive Tape
  • Length: 5Meters/Reel
  • Lifespan: 50,000Hours


1*RGB LED Strip COB(5Meters/Reel)


840LEDs LED Strip COB

Flexible LED Strip COB

576LEDs LED Strip COB


Write a review

Note: HTML is not translated!
Bad           Good