Check the DMX 512 Light Decoder with 20 keys RF remote, which adopts the advanced micro control unit, can receive the DMX-512 standard digital control signal which is internationally widely used and changes the signal into PWM control signal to actuate the LED Lights, it can also connect the DMX digital console to change the light or each dynamic effect. the DMX512 Decoder working in DC12V or DC24V, with 3 output channels design, the max output current of each channel is 6A, comes with 20 keys RF remote includes 8 static colors and 4 dynamic modes, you also can adjust the brightness of the LED Light and power on or off.


LED Decoder Features:

  • Item NO: HX-SZ200-DECODER
  • Size: 127mm*42mm*33mm(L*W*H)
  • Working temperature: -20-60℃
  • Static power consumption: <1W
  • Working Voltage: DC12V-DC24V
  • Output Gray: 256 Levels (RGB Each)
  • Power: DC12V: ≤216W   24V: ≤432W
  • Output Channels: 3
  • Current: ≤3*6A
  • Frequency Of RF Remote Control: 433.9MHz
  • Frequency Of Pwm Signal Output: 5.2KHz
  • Adopts Standard RJ45 Network Cable Port
  • Adopts 10-Bit Side Of Dial-Type DIP Switch
  • 20 Keys RF Remote Control Included
  • 10 Modes In Total, 8 Static Colors And 6 Dynamic Modes
  • Weight: 200g
  • 2 Years Warranty


Remote Features:

  • Working Temperature: -20℃-60℃
  • Size: 85*51*6mm(L*W*H)
  • Working Voltage: DC3V(CR2025)
  • Standby Current: <3.3uA
  • Working Current: <12mA
  • Standby Power: 9.9uW
  • Working Power: 36mW
  • RF Frequency: 433.92MHz
  • RF Distance: ≤20m
  • Weight: 30g


Includes:

1*DMX 512 Light Decoder

1*20 Keys RF Remote

RF DMX 512 Light Decoder And Remote Size

RF DMX 512 Light Decoder Interface DMX 512 Application DMX 512 Decoder Application DMX Decoder Remote Function DMX 512 Light Decoder

RF DMX512 Decoder Installation

Write a review

Note: HTML is not translated!
Bad           Good